SUMMARY

This article describes how to get started with a Microvellum Overdrive enabled version of the SellingPoint system.  This includes obtaining the program, cataloging an Overdrive Product Library, and uploading that to the web.

MORE INFORMATION

Follow these steps to get started with SellingPoint:

1. Download and install the SellingPoint Product Manager from the following location: http://www.vesigo.com/sellingpoint/downloadregistration/SignIn.aspx
    
2. Create a SellingPoint Online account, which will act as the web site store front for a product catalog, by going to this address: http://www.vesigo.com/sellingpoint/SignUp/Default.aspx
    
3. Start the SellingPoint Product Manager and import a catalog from a Microvellum Overdrive Library.  For a demonstration, see: http://www.vesigo.com/sellingpoint/Support/ImportMicrovellumOverdriveLibraryDemo.aspx
    
4. Optionally, modify the catalog of products to fine tune different properties of the product line.  For a demonstration, see: http://www.vesigo.com/sellingpoint/Support/ModifyACatalog.aspx
    
5. Upload the catalog to the SellingPoint Online web site store front.  For a demonstration, see: http://www.vesigo.com/sellingpoint/Support/UploadACatalog.aspx

REFERENCES

For additional demonstrations about working with SellingPoint, see: http://www.vesigo.com/sellingpoint/Demonstrations.aspx

Last Updated:	November 02, 2006
Keywords:	1004 setup sellingpoint microvellum